LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation >> Removal And Installation >> Brake Fluid Reservoir - 2.3L and 3.0L >> Notes

Brake Fluid Reservoir - 2.3L and 3.0L: Notes

Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
NOTE: Automatic transmission shown, manual transmission similar.
Fig 1: Exploded View Of Brake Fluid Reservoir With Torque Specification - 2.3L and 3.0L
GF0041421Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Brake fluid level warning switch electrical connector (part of 14290)
2 2B176 Brake fluid reservoir pin bolt
3 2L074 Brake fluid reservoir seal (2 required)
4 2C246 Brake fluid reservoir