Instrument Cluster (IC) Prove-Out
The instrument cluster (IC) and other vehicle modules carry out a display prove-out to verify that all module controlled warning/indicator lamps and monitored systems are functioning correctly within the instrument cluster (IC). The instrument cluster (IC) and other modules such as the restraints control module (RCM) provide a timed prove-out while other indicators illuminate until engine start up. When the ignition switch is cycled to the ON position with the engine off, the indicators illuminate to prove-out according to the following table:
| Indicator | Indicator Type | Prove-Out Duration |
|---|---|---|
| ABS | Warning | 3 seconds |
| Air bag | Warning | 6 seconds on/2 seconds off |
| Anti-theft | Indicator | Approx. 3 seconds |
| Brake | Warning | 3 seconds |
| Charging system | Warning | Engine startup |
| Check fuel cap | Informational | 3 seconds |
| Door ajar | Warning | None |
| High beam | Informational | None |
| Low fuel | Informational | 3 seconds |
| Low oil pressure | Warning | Engine startup |
| Malfunction indicator lamp (MIL) | Warning | Engine startup |
| Safety belt | Warning | 70 seconds or until the safety belt is fastened |
| Speed control | Informational | None |
| Tire pressure monitoring system (TPMS) | Warning | 3 seconds |
| Traction assist | Warning | 3 seconds |
| Powertrain malfunction (wrench) | Informational | 3 seconds |
| RH/LH turn | Informational | None |