Normal Operation
The compass module (early build) receives voltage from the smart junction box (SJB) through circuit CBP19 (BN/WH) or the auto-dimming interior mirror (late build) receives voltage from the SJB through circuit CBP02 (GN). The compass module (early build) or the interior rear view mirror (late build) is grounded through circuit GD139 (BK/YE). The compass module (early build) or auto-dimming interior mirror (late build) communicates the vehicle direction to the instrument cluster (IC) through circuits VMC30 (BU/GY) and VMC31 (YE/GN) and the direction is displayed in the instrument cluster (IC).
- DTC U2013 (Compass Module is Not Responding) - is a continuous DTC that sets if the instrument cluster (IC) does not receive compass data on circuits VMC30 (BU/GY) and VMC31 (YE/GN).
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Compass module (early build)
- Auto-dimming interior mirror (late build)