LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2006 >> Montego Base, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Charging System (Battery, Mounting And Cables) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

  1. Remove the battery. For additional information, refer to BATTERY  .
  2. Disconnect the battery cable harness locators from the battery tray.
  3. Remove the 4 bolts and the battery tray.
    • To install, tighten to 23 N.m (17 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals