LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Sable Platinum Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Output Shaft Speed (OSS) Sensor >> Installation >> RWD vehicles

RWD vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the OSS sensor.
    • Lubricate the O-ring with clean automatic transmission fluid and install the OSS sensor.
      • Fig 1: Identifying OSS Sensor (4X2 Vehicles)
      GF0006810Courtesy of FORD MOTOR CO.
    • Install the bolt.
      • Tighten to 9 Nm (80 lb-in).
scientia non olet · About LEMON Manuals