LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Sable Platinum Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Forward GEARTRAIN - Assembly >> Assembly

Forward GEARTRAIN - Assembly: Assembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    2. Fig 1: Locating Forward Clutch Assembly
    GF0006956Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    3. Fig 2: Locating No. 9 Forward Clutch Bearing
    GF0006957Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    4. Fig 3: Locating Forward Hub And Ring Gear Assembly
    GF0006958Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    5. Fig 4: Locating Planet Carrier And Bearing Assembly
    GF0006959Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    6. Fig 5: Locating No. 12 Thrust Bearing
    GF0006960Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
    7. Fig 6: Identifying Forward Clutch Assembly
    GF0006961Courtesy of FORD MOTOR CO.
  7. Install the special tools. Position aside to use during transmission assembly.
    8. Fig 7: Positioning Of Transmission Assembly Using Special Tools
    GF0006962Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals