Pinpoint Test KP: Charge Air Cooler (CAC) Pump: Introduction: Notes

This pinpoint test is intended to diagnose the following:

• Charge Air Cooler Pump Relay (14B192).
• Charge Air Cooler Pump Motor (8501).
• Harness circuits: CAC, VPWR and GND.
• Powertrain control module (PCM) (12A650).
  Fig 1: Charge Air Cooler (CAC) Motor Connector

  Courtesy of FORD MOTOR CO.
  Fig 2: Charge Air Cooler (CAC) Relay Connector

  Courtesy of FORD MOTOR CO.