Pinpoint Test C: The Compass Is Inaccurate
- C1 CHECK THE COMPASS ZONE SETTING AND CALIBRATION
- Yes
: GO to C3.
- No
: GO to C2.
- C2 DEMAGNETIZE THE VEHICLE
- Yes
: GO to C3.
- No
: INSTALL a new compass sensor module. Set the zone. REFER to COMPASS ZONE ADJUSTMENT . TEST the system for normal operation.
- C3 CHECK COMPASS ACCURACY
- Position the vehicle and observe the compass display as follows:
COMPASS DISPLAY CHART
| Direction |
Compass Display |
| North |
N |
| Northeast |
NE |
| East |
E |
| Southeast |
SE |
| South |
S |
| Southwest |
SW |
| West |
W |
| Northwest |
NW |
- Does the compass display as indicated?
- Yes
: Compass is OK.
- No
: INSTALL a new compass sensor module. SET the zone. REFER to COMPASS ZONE ADJUSTMENT . TEST the system for normal operation.