LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Sable Platinum Edition >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center >> Diagnosis And Testing >> Information And Message Center >> Principles of Operation >> Warning Messages

Warning Messages

The warning messages are single cycle, non-resettable and repetitive warning messages. A single chime will sound when a warning message is displayed. The single cycle warning messages will display once whenever the ignition switch is turned to ON or a fault occurs in a system and can be cleared by pressing the RESET button.

The signal cycle warning messages are:

The repetitive warning messages are displayed at a fixed interval whenever the ignition switch is turned ON or is in the ACC position. To remove a repetitive warning message, press the RESET button. The message will reoccur after 10 minutes or until the warning condition is corrected.

The repetitive warning messages are:

The non-resettable warning messages will display whenever the ignition switch is turned to ON and a fault occurs in a system. The fault must be corrected to clear the non-resettable warning messages.

The non-resettable warning messages is: