LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Monterey >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine - 6.8L (3V) -- F250-F550 Super Duty) >> In-Vehicle Repair >> Flexplate >> Installation

In-Vehicle Repair: Flexplate: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flexplate and the 8 bolts in the sequence shown.
    • Tighten to 80 Nm (59 lb-ft).
      Fig 1: Identifying Flexplate Bolt Tightening Sequence
      G03920141Courtesy of FORD MOTOR CO.
  2. Install the transmission. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - TORQSHIFT .
scientia non olet · About LEMON Manuals