Pinpoint Test E: The Low Tire Warning Display Is Never/Always On
- E1 CHECK FOR CORRECT OPERATION OF THE MESSAGE CENTER
- Key in ON position.
- Carry out the instrument cluster self-diagnostic test to illuminate all segments of the message display.
- Does the message center display illuminate?
- Yes
: REFER to WHEELS & TIRES
to continue diagnosis of the low tire pressure system.
- No
: GO to E2
.
- E2 CHECK FOR CORRECT INSTRUMENT CLUSTER OPERATION
- Disconnect the instrument cluster connector.
- Check for:
- corrosion
- pushed-out pins
- Connect the instrument cluster connector and make sure it seats correctly.
- Operate the system and verify the concern is still present.
- Is the concern still present?
- Yes
: INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER
. TEST the system for normal operation.
- No
: The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.