LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2004 >> Marauder >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster System And Panel Illumination >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT .
  2. Remove the headlamp switch.
    Fig 1: Removing Headlamp Switch
    G02755248Courtesy of FORD MOTOR CO.
  3. Disconnect the electrical connectors.
    Fig 2: Disconnecting Electrical Connectors
    G02755249Courtesy of FORD MOTOR CO.
  4. Release the retaining tabs and remove the instrument panel dimmer switch
    Fig 3: Removing Instrument Panel Dimmer Switch
    G02755250Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.