LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2003 >> Mountaineer 4.0 K, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Information, Gauges And Warning Devices >> Removal And Installation >> Parking Aid Module >> Removal and Installation

Removal and Installation

  1. Remove the RH interior trim. For additional information, refer to BODY SYSTEM - INTERIOR .
  2. Remove the components in the order indicated in the following illustration and table.
    Fig 1: View Of Parking Aid Module
    G01272078Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals