LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550)) >> Engine Sensors & Switches >> Exhaust BACKPRESSURE Sensor >> Removal & Installation (Excursion & Pickup)

Removal & Installation (Excursion & Pickup)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to OFF position. Disconnect exhaust backpressure sensor electrical connector and remove sensor from mounting bracket. See Fig 1. To install, reverse removal procedure.

Fig 1: Removing & Installing Exhaust Backpressure Sensor
G00248243Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals