Standard Torques - Class 12.9 Metric Bolts And Studs

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

STANDARD TORQUES - CLASS 12.9 METRIC BOLTS AND STUDS

Thread Diameter	Thread Pitch (mm/thread)	Torque^a
6 mm	1	15 Nm (11 lb-ft)
8 mm	1.25	36 Nm (27 lb-ft)
10 mm	1.5	72 Nm (53 lb-ft)
12 mm	1.75	126 Nm (93 lb-ft)
14 mm	2	201 Nm (148 lb-ft)
15 mm	2	252 Nm (186 lb-ft)
16 mm	2	311 Nm (230 lb-ft)
18 mm	2.5	430 Nm (318 lb-ft)
20 mm	2.5	608 Nm (450 lb-ft)

^a Tolerances are ± 10% of nominal value.