Standard Torques - Class 10.9 Metric Bolts And Studs

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

STANDARD TORQUES - CLASS 10.9 METRIC BOLTS AND STUDS

Thread Diameter	Thread Pitch (mm/thread)	Torque^a
6 mm	1	13 Nm (10 lb-ft)
8 mm	1.25	31 Nm (23 lb-ft)
10 mm	1.5	62 Nm (46 lb-ft)
12 mm	1.75	107 Nm (79 lb-ft)
14 mm	2	172 Nm (127 lb-ft)
15 mm	2	216 Nm (159 lb-ft)
16 mm	2	266 Nm (197 lb-ft)
18 mm	2.5	368 Nm (272 lb-ft)
20 mm	2.5	520 Nm (385 lb-ft)

^a Tolerances are ± 10% of nominal value.