LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Caliper >> Removal

Front Brake Caliper: Removal

NOTE: If caliper does not require service, it is not necessary to remove brake hose from caliper unless indicated.
  1. Raise and support vehicle.
  2. Remove wheel and tire assembly.
  3. Mark caliper to ensure replacement on correct knuckle. Remove caliper locating pins. See Fig 1 .
  4. Remove banjo bolt and discard copper washers (if necessary). Lift caliper off rotor.
  5. Remove brake pads.
Fig 1: Identifying Disc Caliper Locating Pins
G00310828Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals