Test C: Low Fuel Indicator Never/Always On

Turn ignition off. Disconnect instrument cluster connectors. See ELECTRONIC INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Measure resistance of Violet/White wire between instrument cluster connector C267C terminal No. 15 and connector C267B terminal No. 8. See Figure and Figure . Resistance should be less than 5 ohms. Measure resistance between ground and instrument cluster connector C267C terminal No. 15 (Violet/White wire). Resistance should be 10 k/ohms or more. If both resistances are as specified, replace instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. If either resistance is not as specified, repair open or short to ground in Violet/White wire.