LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2000 >> Villager Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Caliper >> Installation

Front Brake Caliper: Installation

NOTE: Ensure correct caliper assembly is installed onto correct knuckle. Caliper bleed screw should be on top of caliper when installed.
  1. Retract caliper piston fully in piston bore. Lubricate caliper locating pins with silicone dielectric. To install, reverse removal procedure.
  2. Fill brake fluid reservoir with DOT 3 brake fluid and bleed system. See BLEEDING PROCEDURE  under BLEEDING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals