Pinpoint Test R - Distance To Empty Does Not Go Below 200 Miles With Fuel Tank Empty, Or Distance To Empty Always Indicates Zero
- Perform PINPOINT TEST D. Repair or replace as necessary. If fuel gauge is okay, go to next step.
- Perform PINPOINT TEST G. Repair or replace as necessary. If speedometer is okay, go to next step.
- Turn ignition off. Remove instrument cluster. See REMOVAL & INSTALLATION . Disconnect instrument cluster connector C3. Check for voltage signal at connector C3, pin No. 8 (Orange/Black wire). If voltage signal is present, replace instrument cluster. If voltage signal is not present, repair Orange/Black wire.