LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1995 >> Villager LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Electronic >> Removal & Installation >> Heated Back Window Switch & Light >> Removal & Installation

Removal & Installation

  1. Disconnect the battery ground cable.
  2. Pull the heated back window switch and light from the instrument cluster bezel by hand.
  3. Disconnect the heated back window switch and light electrical connector and remove the switch from the instrument cluster bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals