LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1995 >> Villager LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Electronic >> Removal & Installation >> Glove Compartment >> Removal & Installation (Door Glove Compartment)

Removal & Installation (Door Glove Compartment)

  1. Disconnect the battery ground cable.
  2. Remove the two glove compartment screws.
  3. Remove the glove compartment and disconnect the glove compartment lamp electrical connector.
  4. Remove the four glove compartment door hinge screws and the glove compartment door (06024).
  5. To install, reverse the removal procedure. Tighten the glove compartment door hinge screws to specification. See TORQUE SPECIFICATION  .
scientia non olet · About LEMON Manuals