LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Electronic >> Removal & Installation >> Hazard Switch >> Removal & Installation

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Pull the hazard switch from the electronic instrument cluster bezel.
  3. Disconnect the hazard switch electrical connector. See Fig 1 .
  4. To install, reverse removal procedure.
Fig 1: Removing Hazard Switch
G00092589Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals