LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Analog >> Removal & Installation >> Keyless Diode >> Removal & Installation

Removal & Installation

  1. Remove the front lap belt retractor.
  2. Disconnect the keyless diode electrical connector and remove the keyless diode. To install, reverse the removal procedure. See Fig 1 .
Fig 1: View Of Keyless Diode Location
G00100037Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals