LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Capri Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [H] & 1.6L 4-CYL DOHC - VINS [Z,6] >> Engine Cooling >> Water Pump >> Removal (1.6L)

Removal (1.6L)

  1. Remove timing belt. See TIMING BELT  under REMOVAL & INSTALLATION. Drain cooling system. Remove timing belt tensioner and idler pulleys. Remove oil dipstick bracket retaining bolt.
  2. Remove power steering pump from retaining bracket, leaving hoses attached. Remove power steering bracket and position power steering pump to one side. Remove water pump outlet. Remove water pump retaining bolts and water pump.
NOTE: Raise engine slightly with floor jack, if required, to gain clearance for water pump removal.
scientia non olet · About LEMON Manuals