LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Capri Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [H] & 1.6L 4-CYL DOHC - VINS [Z,6] >> Engine Cooling >> Water Pump >> Installation (1.6L)

Installation (1.6L)

  1. Clean all gasket surfaces. Transfer rubber belt cover seal to new water pump (if required). Position water pump with new gasket and install retaining bolts. Install pump outlet with new gasket and "O" ring.
  2. Install oil dipstick retaining bolt. Install timing belt tensioner and idler pulleys. Install power steering pump bracket. Install power steering pump. Tighten all bolts and nuts to specification. See TORQUE SPECIFICATIONS TABLE  at the end of this article.
  3. Install timing belt. Fill cooling system. Start engine and check for leaks and proper system function.
scientia non olet · About LEMON Manuals