LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1992 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [H] & 1.6L 4-CYL - VINS [Z,6] >> Removal & Installation >> Timing Belt >> Installation (1.3L)

Installation (1.3L)

  1. Ensure timing belt and sprockets are clean and not worn or damaged. Align crankshaft and camshaft timing marks. See Fig 1. No. 1 cylinder must be at TDC of compression stroke.
  2. Position belt on camshaft sprocket. Install timing belt tensioner spring, spring cover and pulley. Tighten tensioner pulley bolt to specification. See TORQUE SPECIFICATIONS  table at end of article. To complete installation, reverse removal procedure. Tighten all bolts and nuts to specification.
Fig 1: Aligning Camshaft & Crankshaft Timing Marks (1.3L)
G60095Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals