LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1992 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [H] & 1.6L 4-CYL - VINS [Z,6] >> Removal & Installation >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

Position new gasket on cylinder head and inlet pipe. Install exhaust manifold and nuts. Tighten nuts to specification. See, at end of article, TORQUE SPECIFICATIONS  table. To complete installation, reverse removal procedure. Tighten all bolts and nuts to specification.

scientia non olet · About LEMON Manuals