LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1992 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VIN [H] & 1.6L 4-CYL - VINS [Z,6] >> Removal & Installation >> Exhaust Manifold >> Installation (1.6L Non-Turbo)

Installation (1.6L Non-Turbo)

Install exhaust manifold gaskets. Install heavier gasket first. Install exhaust manifold and tighten retaining nuts to specification. See TORQUE SPECIFICATIONS  table at end of article. Connect O2 sensor electrical connector. Install manifold heat shield. Install intake air tube. Connect front exhaust pipe to intake manifold and tighten retaining nuts to specification. Install exhaust support bracket, if removed, and tighten engine mount bolt to specification. Start engine and check for leaks.

scientia non olet · About LEMON Manuals