Oil Pump: Removal
Remove oil pan, pick-up tube and screen, timing belt and crankshaft sprocket. Remove front engine cover bolts and remove front cover. Remove bolts retaining pump cover to back side of front cover housing.
2) Remove pump cover and inner and outer gears. Pry out front seal from front cover. Remove cotter pin. Remove pressure regulator retainer, spring and valve.
OIL PUMP SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Inner Gear-To-Outer Gear | ||
| 1.3L | .008 (.20) | |
| 1.6L | .0008-.0063 (.02-.16) | |
| Outer Gear-To-Housing | ||
| 1.3L | .009 (.22) | |
| 1.6L | .0035-.0071 (.09-.18) | |
| End Play | ||
| 1.3L | .006 (.14) | |
| 1.6L | .0012-.0043 (.03-.11) | |