Fuel Gauge Sending Unit: Festiva
Remove fuel gauge sending unit from tank. See FUEL SENDING UNIT under REMOVAL & INSTALLATION. Connect an ohmmeter and check sending unit resistance as indicated in FUEL GAUGE SENDING UNIT RESISTANCE (FESTIVA) table. Replace sending unit if resistance is drastically different than specification.
FUEL GAUGE SENDING UNIT RESISTANCE (FESTIVA)
| Float Position | Ohms |
|---|---|
| Full Position (Up) | Approximately 7 |
| Half-Full Position (Middle) | Approximately 33 |
| Empty Position (Down) | Approximately 95 |