LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1982 >> Lynx RS, Automatic Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension - Ford Motor Co. Front Wheel Drive >> Removal & Installation >> Tie Rod >> Removal

Tie Rod: Removal

  1. Raise vehicle on hoist. Scribe a vertical mark on tie rod front bracket at bolt head centerline, for proper installation of new bolt.
  2. Remove nut, washers and insulator attaching tie rod to spindle. Remove nut and bolt attaching tie rod to body bracket, and remove tie rod.
    NOTE: It may be necessary to pry front bracket sheet metal apart slightly to remove tie rod.
scientia non olet · About LEMON Manuals