LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1982 >> LN7 Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engines 1.6 Liter 4-Cylinder >> Camshaft >> Camshaft Timing & Belt Replacement >> Removal

Camshaft Timing & Belt Replacement: Removal

  1. Whenever removing or replacing a timing belt, remove timing belt cover and align timing mark on camshaft drive sprocket with timing mark on cylinder head. Temporarily attach timing belt cover to ensure crankshaft pulley TDC mark aligns with timing mark on cover.
  2. Loosen belt tensioner bolts. Pry tensioner away from belt and tighten 1 bolt. Remove crankshaft pulley and timing belt.
scientia non olet · About LEMON Manuals