LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1980 >> Bobcat Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Switches, Gauges & Instrument Panels >> Removal & Installation >> Instrument Cluster >> Removal (Pinto, Bobcat)

Removal (Pinto, Bobcat)

  1. Disconnect battery ground cable. Remove speedometer cable and steering column cover. Loosen column mounting nuts and lower column about 1/2". Disconnect wiring from cluster.
  2. Remove screws retaining cluster and pull cluster out along angle of steering column. If equipped with optional gauge cluster, remove screws retaining optional cluster to instrument panel. Remove housing from the front. Disconnect printed circuit plug. Remove cluster from rear through main cluster opening.
scientia non olet · About LEMON Manuals