LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1980 >> Bobcat Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Switches, Gauges & Instrument Panels >> Removal & Installation >> Instrument Cluster >> Removal (Ford, Mercury, Continental, Mark VI)

Removal (Ford, Mercury, Continental, Mark VI)

  1. Disconnect battery ground cable. Remove speedometer cable from rear of cluster. Remove cluster trim screws and trim cover.
  2. Remove lower steering column cover. Loosen screw and remove cable, then remove transmission indicator clamp from steering column.
  3. Remove four cluster screws, electrical connectors, and pull cluster from instrument panel.
scientia non olet · About LEMON Manuals