Bleeding Sequence
Before bleeding, exhaust all vacuum from power unit by pushing brake pedal several times. Bleed master cylinder, if equipped with bleed screws, then bleed wheel cylinders in sequence listed:
| Application | Sequence | |||
|---|---|---|---|---|
| American Motors | Longest Line First | |||
| Chrysler Corp. | RR, LR, RF, LF | |||
| Ford Motor Co. | RR, LR, RF, LF | |||
| General Motors | ||||
| Buick & Oldsmobile(1) | LF, RF, LR, RR | |||
| Cadillac & Pontiac | RR, LR, RF, LF | |||
| Chevrolet | Nearest to Master Cyl. First | |||
|
||||