Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Ford F550 Super Duty and 2010 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Brake tube-to-flexible hose fitting | 18 | - | 159 | ||
| Brake caliper anchor plate bolts | 400 | 295 | - | ||
| Differential bearing cap bolt | 190 | 140 | - | ||
| Differential carrier housing bolt(1) | - | - | - | ||
| Driveshaft bolts (vehicles with circular flange) | 100 | 74 | - | ||
| Driveshaft bolts (vehicles with split pin yoke) | 62 | 46 | - | ||
| Fill plug | 68 | 50 | - | ||
| Pinion hex nut | 1128 | 832 | - | ||
| Rear wheel speed sensor bolt | 20 | - | 177 | ||
| Ring gear bolts | 203 | 150 | - | ||
| Shock absorber nuts and bolts | 90 | 66 | - | ||
| U-bolt nuts(1) | - | - | - | ||
|
|||||