LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2778 (Information Center - Instrumentation, Message Center And Warning Chimes -- F250-F550 Super Duty) >> General Procedures >> Message Center Configuration >> Oil Life Start Value - Base Instrument Cluster (IC)

Oil Life Start Value - Base Instrument Cluster (IC)

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
  1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
  2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
  3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
  4. NOTE: The oil life start value reduces by 10% for each second that the SELECT/RESET button is held once the oil life start value begins decreasing.

    Continue to hold the SELECT/RESET button until the oil life begins to decrease in value (from 100% down to 10%), continuing to hold until the desired start value is displayed.

  5. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
scientia non olet · About LEMON Manuals