Front Suspension - Super Duty F-450, F-550
WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The front suspension consists of the following components:
- Coil springs
- Mono-tube axle
- Radius arms
- Shock absorbers
- Stabilizer bar
- Stabilizer bar links
- Track bar
- Wheel knuckles
- Wheel studs
The front suspension system for the Super Duty F-450 and F-550 RWD is a solid (mono-tube), non-driving type axle that uses radius arms to control lateral movement. The wheel knuckles are attached to the front axle with upper and lower ball joints and the system uses coil springs and shock absorbers. The Super Duty F-450 and F-550 also incorporate a track bar to aid in vehicle stability.