Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS CHART

Courtesy of FORD MOTOR CO.	2 or 3 Jaw Puller 205-D027 (D80L-1013-A) or equivalent
Courtesy of FORD MOTOR CO.	17.5 Ton Press 014-00021
Courtesy of FORD MOTOR CO.	Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-A)
Courtesy of FORD MOTOR CO.	Fixture, Gear Pack 308-381
Courtesy of FORD MOTOR CO.	Gauge, Clutch Housing 308-021 (T75L-4201-A)
Courtesy of FORD MOTOR CO.	Gear/Bearing Heater 164-R3900
Courtesy of FORD MOTOR CO.	Guide, Thrust Washer 308-415
Courtesy of FORD MOTOR CO.	Installer, Wheel Speed Sensor Ring 206-059 (T94P-20202-B1)
Courtesy of FORD MOTOR CO.	Puller, Bearing 205-D064 (D84L-1123-A) or equivalent
Courtesy of FORD MOTOR CO.	Removal Screw, Bearing Tube 308-092 (T84T-7025-B)
Courtesy of FORD MOTOR CO.	Remover, Bearing Collet Sleeve 308-029 (T75L-7025-G)
Courtesy of FORD MOTOR CO.	Remover/Installer, Bearing Tube 308-052 (T77J-7025-B)
Courtesy of FORD MOTOR CO.	Remover/Installer, Thrust Washer Bearing Cup 308-416
Courtesy of FORD MOTOR CO.	Remover/Installer, Transmission Bearing Collet 308-132 (T87T-7025-FH)
Courtesy of FORD MOTOR CO.	Shaft Protector Set 205-DS004 (D80L-625-A) or equivalent