Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS CHART

Courtesy of FORD MOTOR CO.	Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
Courtesy of FORD MOTOR CO.	Fixture, Gear Pack 308-381
Courtesy of FORD MOTOR CO.	Gauge, Clutch Housing 308-021 (T75L-4201-A)
Courtesy of FORD MOTOR CO.	Gear/Bearing Heater 164-R3900
Courtesy of FORD MOTOR CO.	Handle 205-D055 (D81L-4000-A) or equivalent
Courtesy of FORD MOTOR CO.	Heat Gun 107-R0300 or equivalent
Courtesy of FORD MOTOR CO.	Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
Courtesy of FORD MOTOR CO.	Installer, Centerplate Front Bearing Cup 308-390
Courtesy of FORD MOTOR CO.	Installer, Input Shaft Bearing Cup 308-391
Courtesy of FORD MOTOR CO.	Installer, Input Shaft Oil Seal 308-379
Courtesy of FORD MOTOR CO.	Installer, Output Shaft Oil Seal (4x4) 308-383
Courtesy of FORD MOTOR CO.	Installer, Output Shaft Oil Seal (4x2) 308-382
Courtesy of FORD MOTOR CO.	Remover, Bearing Cup 308-047 (T77F-1102-A)
Courtesy of FORD MOTOR CO.	Remover, Input Shaft Bearing Cup 308-S392
Courtesy of FORD MOTOR CO.	Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C)
Courtesy of FORD MOTOR CO.	Remover/Installer, Thrust Washer Bearing Cup 308-416
Courtesy of FORD MOTOR CO.	Slide Hammer 100-01 (T50T-100-A)
Courtesy of FORD MOTOR CO.	Socket, Mainshaft Locknut (36 mm) 308-127 (T87T-7025-AH)