LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2751 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Forward Geartrain - Assembly >> Assembly

Forward Geartrain - Assembly: Assembly

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    Fig 1: Identifying Forward Clutch Assembly
    G06141034Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    Fig 2: Locating No. 9 Forward Clutch Bearing
    G06141035Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    Fig 3: Installing Forward Hub And Ring Gear Assembly
    G06599874Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    Fig 4: Locating Planet Carrier And Bearing Assembly
    G06141037Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    Fig 5: Locating No. 12 Thrust Bearing Onto Forward Carrier Assembly
    G06141038Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
      Fig 6: Locating Input Shell Assembly
      G06141039Courtesy of FORD MOTOR CO.
  7. Install the Adapter and the Transmission Forward Clutch Assembly Installer. Position aside to use during transmission assembly.
    Fig 7: Installing Adapter And Transmission Forward Clutch Assembly Installer
    G06141040Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals