LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2751 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F250-F550 Super Duty) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicle >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS CHART

G06291098Courtesy of FORD MOTOR CO.
Fluke 77-IV Digital Multimeter
FLU77-4 or equivalent
G06292721Courtesy of FORD MOTOR CO.
Transmission Fluid Pressure Gauge
307-004 (T57L-77820-A)
G06291099Courtesy of FORD MOTOR CO.
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: If equipped, turn the Power Take-Off (PTO) unit off for correct test results. For a description of PTO  operation, refer to TRANSMISSION ELECTRONIC CONTROL SYSTEM . On-Board Diagnostic (OBD) is not accessible when the PTO  unit is in operation. Shift Solenoid Pressure Control B (SSPCB) is on when the PTO  is in operation.

Any time an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.