LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2748 (Engine Mechanical - 6.8L (3V) -- F250-F550 Super Duty) >> Removal >> Cylinder Head >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION CHART

G06392291Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-1039
G06392517Courtesy of FORD MOTOR CO.
Engine Lifting Bracket
303-F047 (014-00073) or equivalent
G06596829Courtesy of FORD MOTOR CO.
Fan Clutch Nut Wrench
303-214 (T83T-6312-B)
G06596507Courtesy of FORD MOTOR CO.
Fan Pulley Holding Wrench
303-478 (T94T-6312-AH)
G06392551Courtesy of FORD MOTOR CO.
Remover, Crankshaft Front Seal
303-107 (T74P-6700-A)
G06595130Courtesy of FORD MOTOR CO.
Remover, Crankshaft Vibration Damper
303-009 (T58P-6316-D)
G06392552Courtesy of FORD MOTOR CO.
Remover/Installer, Cylinder Head
303-572 (T97T-6000-A)