Intake Manifold: Material

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item	Specification
Motorcraft® Metal Surface Prep ZC-31-A	-
Motorcraft® Silicone Gasket Remover ZC-30	-

Fig 1: Intake Manifold And Related Replacement Components With Torque Specifications

Courtesy of FORD MOTOR CO.

PARTS DESCRIPTION CHART

Item	Part Number	Description
1	9F792	Radiator hose
2	W705800	Radiator hose clamp
3	9229	Heater hose
4	-	Heater hose clamp
5	18465	PCV coolant hose
6	W527352	PCV coolant hose clamp
7	-	Intake Manifold Runner Control (IMRC) actuator electrical connector (part of 12B637)
8	-	Fuel rail pressure and temperature sensor vacuum hose (part of 9E498)
9	-	Fuel rail pressure and temperature sensor electrical connector (part of 12B637)
10	-	Fuel injector electrical connector (10 required) (part of 12B637)
11	18465	PCV coolant hose
12	W527352	PCV coolant hose clamp
13	6K817	PCV tube
14	-	Engine vacuum hose
15	W527352	PCV coolant hose clamp
16	18465	PCV coolant hose
17	9E498	Intake manifold vacuum hose
18	-	Engine wiring harness retainer (part of 12B637)
19	-	Electronic Throttle Control (ETC) electrical connector (part of 12B637)
20	-	Evaporative Emission (EVAP) tube quick connect coupling
21	-	Throttle Position (TP) sensor electrical connector (part of 12B637)
22	-	Engine wiring harness retainer (part of 12B637)
23	6758	Crankcase ventilation tube
24	-	Engine wiring harness retainer (part of 12B637)
25	-	Engine vacuum harness retainer (part of 9D446)
26	W710758	Intake manifold bolt (12 required)
27	W503282	Engine coolant crossover assembly bolts (3 required)
28	8C387	RH engine coolant crossover assembly gasket
29	8C388	LH engine coolant crossover assembly gasket
30	8C369	Engine coolant crossover assembly
31	9439	Intake manifold gaskets (10 required)
32	9424	Intake manifold assembly