LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2748 (Engine Mechanical - 6.8L (3V) -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Intake Manifold Assembly >> Disassembly

Intake Manifold Assembly: Disassembly

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 bolts and the Throttle Body (TB).
    • Discard the TB  gasket.
  2. Remove the 6 bolts and the TB  spacer.
  3. Remove the Intake Manifold Runner Control (IMRC) actuator rod C-clip.
  4. Remove the 3 bolts and the IMRC  actuator.
    5. NOTE: The fuel rail and fuel injectors are removed as an assembly.
  5. Remove the 6 bolts and the fuel rail assembly.
  6. Remove the 10 fuel injector-to-fuel rail locking clips and separate the fuel injectors from the fuel rail.
    • Discard the 2 O-ring seals from each fuel injector.
scientia non olet · About LEMON Manuals