LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2747 (Engine Mechanical - 5.4L (3V) -- F250-F350 Super Duty) >> Installation >> Cylinder Head >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE

G06392706Courtesy of FORD MOTOR CO.
 Alignment Pins, Cylinder Head
303-1040 (SR-015486)
G06392291Courtesy of FORD MOTOR CO.
 Compressor, Valve Spring
303-1039
G06392517Courtesy of FORD MOTOR CO.
 Engine Lifting Bracket
303-F047 (014-00073) or equivalent
G06598397Courtesy of FORD MOTOR CO.
 Fan Clutch Nut Wrench
303-240 (T84T-6312-D)
G06595336Courtesy of FORD MOTOR CO.
 Fan Pulley Holding Wrench
303-239 (T84T-6312-C)
G06394637Courtesy of FORD MOTOR CO.
 Holding Tool, Crankshaft
303-448 (T93P-6303-A)
G06391650Courtesy of FORD MOTOR CO.
 Installer, Crankshaft Vibration Damper
303-102 (T74P-6316-B)
G06392230Courtesy of FORD MOTOR CO.
 Installer, Crankshaft Front Oil Seal
303-635
G06392232Courtesy of FORD MOTOR CO.
 Installer, Front Cover Oil Seal
303-335 (T88T-6701-A)
G06392292Courtesy of FORD MOTOR CO.
 Locking Tool, Cam Phaser
303-1046
G06392552Courtesy of FORD MOTOR CO.
 Remover/Installer, Cylinder Head
303-572 (T97T-6000-A)
scientia non olet · About LEMON Manuals