General Specifications
WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Preload | |
| Mainshaft and countershaft | 0.02-0.09 mm (0.00079-0.0035 in) |
| Component Mounting Temperatures | |
| Taper roller bearing inner race | 150°C (300°F) |
| Synchronizer assemblies | 150°C (300°F) |
| Thrust washers | 150°C (300°F) |
| Shaft bushings | 150°C (300°F) |
| Top roller bearing outer race | 150°C (300°F) |
| Output ball bearing | 150°C (300°F) |
| Synchronizer | |
| 1st and 2nd synchronizer with new gear and synchronizer ring clearance | 1.5-1.85 mm (0.059-0.073 in) |
| 3rd, 4th, 5th, reverse and low with new gear and synchronizer ring clearance | 1.4-1.7 mm (0.055-0.066 in) |
| 1st and 2nd service limit | 1.0 mm (0.04 in) |
| 3rd, 4th, 5th, reverse and low service limit | 1.0 mm (0.04 in) |
| Physical Weight | |
| Transmission (with fluid) | 113Kg (250 lbs) |