Output Shaft Seal: Notes
WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Holding Fixture, Drive Pinion Flange | 205-126 (T78P-4851-A) | |
| Installer, Output Shaft Oil Seal (4WD) | 308-383 | |
| Installer, Output Shaft Oil Seal (RWD) | 308-382 | |
| Remover, Input Shaft Oil Seal | 308-375 | |
| Slide Hammer | 100-001 (T50T-100-A) | |
| Socket, Mainshaft Lock Nut (36 mm) | 308-127 (T87T-7025-AH) |
Material
| Item | Specification |
|---|---|
| Threadlock 262 TA-26 |
WSK-M2G351-A6 |