LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2368 (Manual Transmission - ZF S6-650 & 65-750 - 6-Speed -- F250-F550 Super Duty (2009)) >> Disassembly And Assembly Of Subassemblies >> Countershaft Bearing >> Assembly

Countershaft Bearing: Assembly

WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bearing from the Gear/Bearing Heater, then install the countershaft bearing.
    • If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.
    2. Fig 1: Installing Front Countershaft Bearing
    GF0007301Courtesy of FORD MOTOR CO.
  2. Remove the bearing from the Gear/Bearing Heater, then install the rear countershaft bearing.
    • If necessary, use the special tool to seat the bearing.
    3. Fig 2: Installing Rear Countershaft Bearing
    GF0007302Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals